1 review SFPCI-6011 multi-function card is a PCI bus interface card module into the mold out, can be easily applied to the computer with PCI bus slots, with Plug and Play (PnP) function. PC operating system can use the popular Windows family, Unix and other operating systems and professional data acquisition and analysis software, LabVIEW, LabWindows / CVI environments. 
 SFPCI-6011 multi-mode into the mode of interface card installed and easy to use, programming simple. Simply use any computer interface card into the PCI bus slot. The simulation model into the mold by the signal on the card with the 37-pin D-type socket to connect external signal sources and equipment. 
 Mold into parts: the actual needs of the user can select a single-ended or differential input mode. Input channel switching can be set to automatically switch between any continuous channel or by switching the user program. Card is equipped with a 1K word FIFO memory (hereinafter referred to as FIFO), according to user need to install into a 1 ~ 8K words, to facilitate acquisition system in real-time multi-tasking Windows operating system to work. The card can use the AD trigger trigger program, the timer triggers, the trigger interval time, external clock synchronization trigger, external trigger such as trigger gating. System by querying the on-board FIFO memory status, AD conversion completion status, or in response to FIFO interrupt or AD conversion completion interrupt means to achieve with the board's communication and data exchange. 
 Mold the parts: 2-way model of a variety of output range, according to the user needs to increase electrical output initial state, set auto-power output range or output range of lower-level mid-point level. 
 Digital input and output components: 16 digital inputs and 16 digital output interface, the use of 40P flat ribbon cable with external devices. The cable can also be converted from a 37-pin D-type socket output. One digital output with latch function. 16 digital output also has a power function is automatically cleared. 
 Timer / Counters section: equipped with three 16-bit word length of the timer / counter channels, and 2MHz reference clock. Three-way timer / counter channel is mainly based AD converter card provides several timer trigger AD, the user can only use the timer / counter interrupt timer channel 2 to achieve. 
 2 Specifications 
 2.1 mold into parts (hereinafter referred to as AD) 
 ? AD channels: 16 single-ended, double-ended 8; 
 ? AD signal range: 0V ~ 10V;-5V ~ +5 V;-10V ~ +10 V; 
 (Optional range: 0V ~ 5V;-2.5V ~ +2.5 V; manually set the 2-fold magnification) 
 ? Input impedance: ≥ 10MΩ 
 ? AD converter resolution: 12 
 ? AD conversion rate: 10us 
 ? amplifier set-up time: 7uS (0.01%) 
 ? AD conversion system by rate: 100KHz 
 ? AD data FIFO buffer memory (FIFO) memory depth: 1K words 
 ? AD trigger mode: the program trigger; timed trigger; intermittent timed trigger; external clock trigger; outside the gated trigger time; 
 ? AD communication: AD conversion end interrupt, FIFO half-full interrupt, the program queries; 
 ? AD converter nonlinearity: ± 1LSB 
 ? AD converter output code system: the original code unipolar bipolar offset code; 
 ? systems integration error: ≤ ± 0.05% FS 
 2.2 out of part of the mold (hereinafter referred to as DA) 
 ? DA channels: 2 
 ? DA Range: 0 ~ 2.5V; 0 ~ 5V; 0 ~ 10V;-2.5V ~ +2.5 V;-5V ~ +5 V;-10V ~ +10 V; 
 ? DA converter resolution: 12 
 ? DA converter input code system: the original binary code (unipolar output) 
 Offset binary code (bipolar voltage output) 
 ? DA conversion set-up time: ≤ 5μS (0 ~ 2.5V;-2.5V ~ +2.5 V) 
 (RC filter when no full-scale step) ≤ 50μS (0 ~ 5V;-5V ~ +5 V; 0 ~ 10V) 
 ≤ 100μS (-10V ~ +10 V) 
 ? 2 Road DA output state power: the power output of lower level by automatically or automatically output power while the median level 
 ? DA conversion comprehensive error: Voltage mode: ≤ 0.1% FS 
 2.3 Digital input and output part (hereinafter referred to as DI / DO) 
 ? DI: 16 Road; 
 ? DO: 16 Road; 
 ? input and output level: TTL / CMOS level compatible; 
 2.4 Timer / Counters section (hereinafter referred to as T / C) 
 ? standard clock: 2MHz, 50% duty cycle 
 ? timer / counter channels: 3 16-bit timer / counter channel (Timer / Count 2 to the user part of the opening) 
 2.5 Power Consumption 
 ? +5 V ≤ 600mA 
 ? +12 V ≤ 100mA 
 ?-12V ≤ 70mA 
 2.6 Use of environmental requirements 
 Operating temperature: 10 ℃ ~ 40 ℃ 
 Relative Humidity: 40% to 80% 
 Storage Temperature: -55 ℃ ~ +85 ℃ 
 2.7 Dimensions: (without bezel) length × height = 165mm × 115mm